Mingo How to fix your Cooltec_No BOMB Auto Roll

[EVD]

Mingo's Guide and files to get ur Cooltec or Megasat Pro Backup so U can use Mingos 128 Loader and Bin and Have all the features of the Coolsat 128 bin with out the time bomb crap , If your Cooltec or Megast Pro was affected by the July 1st timebomb , you need to follow this info to get it back up and running ( need to jtag this in ) So that After you get it back up you can Use Mingo 128 bin and Loader and Get all the features of the 128 bin and Load with His loader and Not have to worry about anymore Timebomb crap , If you were luck enough to not get hit by the timebomb ( either someone warned you about it after it started and you pulled the Sat cable off before it happened or you were using the Pre- time bomb bin 124 ) then you can skip this step and go right to using Mingos Loader and 128 bin which I posted in these forums , if you already had a 125,126,127 or 128 Coolsat bin on your Cooltec or Megasat Pro and the timebomb didn't go off because you Unplug the Sat cable before it Happened , I would advise flashing back to Factory Coolsat bin ( I think its 120) or 124 before using Mingos Loader and 128 Bin , but this is only for thos Lucky enuff that although they had one of the 4 mentioned time bomb bins on there Cooltec or Megasat pro they were lucky enuff to Pull the Sat cable of the Unit ( which Idon't think many were this lucky but there were a few after they start hereing about it on forums , Anyways here is the C/P from Mingo's post and the file to get your timebomb Cooltec or Megasat back up and running , so then you can Use the Mingo 128 Loader and Bin after you Have succesfully Jtagged these files in
PDF Guide how to Jtag your Cooltec Here is the PDF and the filles to restore your Cooltec back to health. and a how to Jatag your Cooltec with auto roll. Hope this helps some one.

USE FILES AT YOUR OWN RISK...