How To Upgrade Digiwave Diamond Receiver

[grynner]

How To Upgrade Digiwave Diamond Receiver
---This Diamond Receiver is the High End receiver--you need a Female To Female Straight through Upgrade Cable
---Need a STBtool.exe upgrade software
---Need a Bin file.

How to download new software to Digiwave Diamond Receiver

1. Download STB Download Tool (STBTool) and save in a file directory
2. Download new software and save in a file directory
3. Connect RS 232C cable between PC and STB
4. Run DG Manager.exe
5. Browse the new software in your file directory
6. Check COM port
7. Make sure STB is power on
8. Click on Connect, and it begins downloading
9. It shows downloading status on DG Manager and front panel display
10. After downloading is completed, STB will reset automatically
11. Go to System Information, and make sure software version

TIP.
If you need to download software on more units, you just leave DG Manager on and turn on the power of the next STB that you wish to download, it will begin downloading automatically.