How To Setup The Digiwave Receiver

[grynner]

c&p from another site,thanks goes to z3ro cool



How To Setup The Digiwave Receiver


HOW TO SETUP THE DIGAWAVE 6800

What You Will Need:
Loader Software
Null Modem Cable (Same as Blackbird, not Pansat or Fortec) Pins 2&3,4&6, and 7&8 are crossed.
Digawave Receiver.
Latest Keys For Dish/B3V

Setting Up The Receiver:

1. Extract FTLink and the latest .bin file to a folder on your computer
2. Connect the null modem cable from comm port 1 on your computer to the receiver.
3. Turn on receiver and wait for it to boot up.
4. Go to the folder where you saved the files and double click "FTLink.exe"
5. When the program window opens, click "Setup Comm" and select Comm 1 then click "Ok"
6. You should now see your receiver info. If you get a "Connection Failed" message and no receiver info, verify you have the correct cable and comm port. try using comm 2
7. Click "Upgrade Software" and select the bin file you extracted and saved in step 1
8. Wait for the receiver to say "GOOD" (approx. 10 min.) WARNING!! DO NOT INTERRUPT THE PROCESS UNTIL DONE.
9. Unplug receiver and connect it to your dish and TV. (Connect only 1 sat at this time Do not use a switch)
10. Setup antenna as follows and scan the sat:
ANTENNA=1
type=FIXED
Sat=119 (or what ever you have connected to the rcvr)
Lnb TYPE=Normal
Lnb freq 1=11250
Lnb freq 2=11250
0/12volts=12V
22k=None
Diseqc=None
C/KU band=None

11. click on system setup
12. Enter 1004 with the remote. No numbers will appear on the screen, but a red button will appear in the lower left of the screen.
13. Press the red(audio) button on the remote and a hidden menu will appear.
14. Scroll Left or right until you see "Nagra" At the bottom of the screen you will see "Add Provider"
15. Press the red(Audio) button on the remote and enter 0001 (0101 for B3V)
16. Scroll down to the first line of f's and enter 0607F0E2616FE145. (For B3v, enter the B3V key)
17. scroll to the next line of f's and enter C26646F87A73482A. (Or the second B3V key)
18. press "Save" and "Exit"
19 At this point you can either watch TV, or connect any additional dishes,lnbfs,and switches you
may have and setup accordingly. You can either scan each sat or load a channel list using "Channel Edit" Note: Blackbird lists will work with this receiver.