step by step for pci cards and Mytheatre

[grynner]

here is a cut and paste from another site will get u up and running using MyTheatre

ENJOY

kk

Step 1
Download and install My Theatre to C:\Program Files\MyTheatre

Step 2
Go to your desktop, click My Computer, then C:, then Program Files, then MyTheatre. Create two folders in the MyTheatre directory called MDPlugins and Plugins.

Step 3
Now, download MDWrapper126c and put its files in the Plugins folder that you just created.

Step 4
Now, download MDFaust-1.8 and MDYankse-1042 tt and put those files in the MDPlugins folder that you just recently created.

Step 5
Make sure that you when you open the Plugins or MDPlugins folder that you see the files, and not just a folder as they won’t work that way.

Step 6
Download softcam (download link can be found below) and put it in the MDPlugins folder.

Step 7
Download and INSTALL MyTheatreAddons1.2. Once that is installed we are ready to open My Theatre.

Step 8
Open My Theatre

Step 9
Right click the large blank screen where the video would appear, and then select Settings -> LNB/Diseq Settings & Scan. A window should pop up

Step 10
Make sure you have your satellite hooked up to the LNB IN port on your PCI card.

Step 11
Find the satellite you have your satellite pointed at on the left side and double click it.

Step 12
Select Ku-Cir on the bottom left.

Step 13
Change the following to...

LOF 1 = 11250000
SW = 0
LOF 2 = 11250000

Step 14
Hit apply right beside C-Band.

Step 15
Now, select Sel All on the bottom right and then hit scan.

Step 16
Wait for scanning to complete.

Step 17
Once done scanning, close the LNB window so that your back to having just My Theatre up.

Step 18
On the top right their should be 6 buttons you can choose, select Satellite and then open the drop down list of the satellite you just scanned and you should see a list of all the channels you just scanned.

Step 19
Double click a channel, doesn’t matter if it is red or not.

Step 20
Right click it, their should be atleast one Audio PID. Select the first from the list. Their should now be a checkmark beside it.

Step 21
Now, right click that channel again and this time hit properties. Under ECM click and highlight the first Nagra Digital under AUTO. Now hit the - sign to delete it. Hit apply and close that window.

Step 22
If video doesn’t turn on right now, right click and double check that the first Audio PID is selected.

Step 23
If video still doesn’t work, right click where the video would appear, go to Settings -> Graphs -> and then click the bottom one.

Step 24
Right click the video screen yet again, go to Display -> and turn on Video.

Step 25
If video is still not working, go to Settings -> Graphs and then choose a different graph (try the one above the one that is selected, keep changing until video turns on)

For your infomation-
the guide and files are all here
h**p://www.mciblue.com/forum/showthread.php?p=633#post633

Before step one you should download and install codecs. you won't get video otherwise.