| How to Mod you TSOP for ROM10 to 10x Emu
Follow these steps and you should have no problem.
1) make sure your tsop is the Lastest Rev. Flashedit V2.1 beta4 tells you the rev it must be.
2) Read your TSOP in Flash edit.
a) Connect Jtag to your computer and Receiver
b) Open jkeys
c) Ckick the Save Mem button and save your TSOP (Some models have 2 tsops)
3) close Jkeys
4) Open Flashedit v2.1 beta4
5) Choose the File saved and you want to edit ( ... at the end on the File line)
6) Click open (If the file says it won't let you open than you need to go back to step 2)
7) click the advanced button
8) change the IRD Hex to 0162B382
9) Change boxkeys to 87382EC5ACC1047E
10) Now shoose the script for your TSOP
11) Apply the script.
12) When the save window comes up name it Modded(your model-build).bin
13) Close Flashedit
14) Write your modded bin to you reciever.
a) Connect Jtag to your computer and receiver
b) Open Jkeys
c) Click on Flash programming button.
d) when flash programming message windows comes up do the following. (Skip for 301:10)
1) unplug IRD
2) Plug back in
3) Press space bar on computer keyboard
e) Click the clear button (top right)
f) After the windows ungrays click the program button
g) When the open window appears choose the modded bin you made.
h) After the windows says it is completed then click ok and close Flashedit windows.  | 
Linear Mode
